Red Panda Labs Remote 4 Switch

$ 99.00

checkbox FREE SHIPPING
BEST PRICE PROMISE
FOREVER SUPPORT

Tensor remote switch with 4 modes to access presets and pedal functions. Scribble strips above each switch can be labeled with a Sharpie and erased using isopropyl alcohol.

Connects to the Tensor or Particle 2 via a 1/4" TRS cable (included). The Tensor firmware needs to be version 1.1 or later. The Remote 4 does not require power.

Size: 10" x 2.75" x 2.25" high

Tensor Remote switch modes

Mode	Switch	Function
1	A	Preset 1 (hold to save)
	B	Preset 2 (hold to save)
	C	Preset 3 (hold to save)
	D	Preset 4 (hold to save)
2	A	Left footswitch
	B	Right footswitch
	C	Preset 1 (hold to save)
	D	Preset 2 (hold to save)
3	A	Record / Overdub
	B	Play / Stop
	C	Play Once
	D	Toggle TIME & PITCH (tap) Toggle SPEED (double tap)
4	A	Toggle SPEED knob
	B	Toggle TIME knob
	C	Toggle PITCH knob
	D	Toggle RAND knob

Loop Sampler (Remote Mode 3)

Mode 3 is designed to use the Tensor as a loop sampler with live loop manipulation. Switches A-C control loop record, overdub, play, and retrigger functions. Switch 4 toggles between the current knob settings and the default (normal playback settings). For example, you can set SPEED to reverse and PITCH to -1 octave for instant access to reverse and half-speed effects. See the user's manual for complete details.

Configuring the Remote Switch:

Start with the pedal powered on and nothing plugged into the CTRL port.
Hold the right footswitch while plugging in the remote switch. The right LED will blink yellow 3 times to indicate it is in CTRL configuration mode. You can release the right footswitch and begin configuration immediately.
Press one of the buttons on the remote switch to select a mode.
Hold the right footswitch for 2 seconds to save the configuration. The right LED will blink green to indicate that the configuration has been saved.