The DL4™ MkII includes everything in the original DL4 Delay Modeler, while introducing 15 new MkII delays drawn from our HX® family of amp and effects processors and both 4-Switch and 1-Switch loopers with up to 240 seconds of record time (expandable to several hours using an optional microSD card). There's also an XLR microphone input, MIDI In and Out/Thru connectors, heavy duty footswitches, three bypass options, and a jack for connecting an optional expression pedal or two additional footswitches. The DL4 MkII is also smaller and lighter than the original, making it an even more appealing choice for modern musicians.
30 Ways to Delay
Fans of the original DL4 delay pedal will find all of their favorite sounds exactly where they expect them to be, with the same Tweak and Tweez control parameter assignments to which they've become accustomed. The 15 new MkII delays were drawn from the HX family of amp and effects processors and include both more recent versions of classic effects and cutting-edge Line 6 originals such as the supervibey Glitch Delay.
Two Ways to Loop
The DL4 MkII features a simple 1-switch looper in addition to a classic 4-switch looper, both of which provide up to 240 seconds of recording time. By inserting an optional microSD card into the slot on the rear of the pedal, recording time may be extended up to several hours and a loop may be stored across power cycles. The loopers operate in either mono or stereo, and may be positioned in the signal chain before or after other effects.
Microphone Input
It's no secret that the DL4 has been used for processing and looping by lots of people besides guitarists, such as vocalists and others who capture their performance with a microphone. Now, dynamic microphones can be plugged directly into the pedal's XLR mic input, eliminating the need for converter cables, mixers, or other external devices. This feature also makes the DL4 MkII a handy tool for sound designers and other sonic adventurers.
Onboard MIDI In and Out/Thru DIN connectors enable the DL4 MkII to receive continuous controller, program change, and other MIDI messages from external sources such as MIDI controllers, thus allowing parameters to be modified dynamically and presets to be selected remotely. The DL4 MkII provides access to three presets using the A, B, and C footswitches, or six presets if the Tap switch is set to toggle between two banks of presets (A, B, and C, and D, E, and F). In addition, the DL4 MkII can store up to 128 presets, selectable via MIDI.
Specs
Delay 30 Types
Reverb 15 Types
Looper Yes, with 1-Switch and 4-Switch Interface
Mono/Stereo Mono or Stereo Input and Output
USB USB Type-C Port for Firmware Updates and USB MIDI Control via Computer
microSD Card Slot microSD Card Slot for Expanded Looper Memory
Audio Inputs 2 x 1/4" / 6.3 mm (Left/Mono and Right)
Instrument Level
Impedance: 1 Megohm
Maximum Input Level: 11.25 dBu
XLR Microphone Input with Preamp
Audio Outputs 2 x 1/4" / 6.3 mm Unbalanced (Left/Mono and Right)
Instrument Level
Impedance: 100 Ohms
MIDI 5-Pin In and Out/Thru
USB MIDI In and Out/Thru for Use with Computer Applications
Power Requirements 9 VDC, 500 mA
Center-Pin Negative, 2.1 mm
Included Line 6 DC-1g Power Adapter
Dimensions 2 x 9.25 x 4.5" / 5.1 x 23.5 x 11.4 cm
Weight 2.03 lb / 0.92 kg
FREE SHIPPING
