BEST PRICE PROMISE
The R80 features a custom 6.8-square-inch Air Motion Transformer (AMT) tweeter that responds to the subtlest waveforms and the highest frequencies. This allows you to hear the “air” and the greater sense of space that is characteristic of audiophile recordings. The R80’s transparent and highly accurate sound makes it ideal for use in both commercial and home recording studios as well as broadcast and post-production environments.
In order to dampen resonance peaks at higher frequencies, conventional dome tweeters are injected with fluid to raise their mass, sacrificing transient response time. By contrast, the custom-designed AMT tweeter in the R80 uses an incredibly thin, folded Kapton® membrane (< 0.01 mm) with an inlayed aluminum circuit functioning as the voice coil, allowing the tweeter to move at the same instant as the electric current. The resulting reactive response time provides marked clarity and superior transient reproduction.
An unfolded AMT tweeter diaphragm provides 8 to 13 times the projection area of a traditional 1-inch dome tweeter, enabling R80 monitors to provide a much wider stereo soundstage than traditional designs. At the same time, the R80 provides a very limited vertical dispersion, which helps to reduce reflections from the ceiling and desktop that can cause phase coherence issues. Because it’s less subject to room-anomaly interference, the R80 reacts predictably and sounds consistent from room to room.
The R80 utilizes an 8-inch, woven composite, low-frequency driver. This rigid cone maintains a more consistent dispersion pattern across its frequency response range. Biamped and driven by a 150W Class D amplifier—making the R series some of the most powerful monitors in their category—these monitors deliver an open, clear, and less fatiguing listening experience.
|1- Balanced XLR|
|1- Balanced ¼” TRS|
|1- Unbalanced RCA|
|Frequency Response||40 Hz – 22 kHz|
|Crossover Frequency||2.6 kHz|
|LF Amplifier Power||100W Class D|
|HF Amplifier Power||50W Class D|
|Peak SPL (@ 1 meter)||107 dB|
|LF Driver||8” woven composite|
|HF Driver Type||AMT|
|Diaphragm||6.8-inch2 (4,400 mm2)|
|Equiv. Diaphragm ø||3” (75 mm)|
|Input Impedance||20 kΩ balanced, 10 kΩ unbalanced|
|SNR (typical, A-weighted)||>100 dB|
|Factory preprogrammed||100-120V ～50/60 Hz or 220-240V ～50/60 Hz|
|Standby Power||< 0.5W|
|External mains fuse|
|Volume Range||A-type taper|
|HF Driver||Linear, +1 dB, -3 dB, -6 dB|
|Highpass filter||Linear, 60 Hz, 80 Hz, 100 Hz|
|Acoustic Space||Linear, -1.5 dB, -3 dB, -6 dB|
|Energy Conservation Mode||On/Off/Query|
|Vinyl-laminated, medium-density fiberboard|
|Width||9.5” (241 mm)|
|Depth||12” (309 mm)|
|Height||15” (379 mm)|
|Weight||19.8 lbs (9 kg)|