- psu improved to be more stable and offer longer battery life\
- oscillators retrimmed to improve audio range
- speaker volume knob adjusted for intuitive control
- labeling for the output jacks on the keyboard changed to “cv 1, 2, 3” the 3 “program gate” jacks changed to “gate 1, 2, 3” and the
- 3 “keyboard” jacks changed to “keyboard cv”
- increased size of screw holes on powder coated aluminum chassis for easy building
- standoffs come pre-threaded for quicker assembly
NOTE
power supply: there is no power supply included. if you want to run the units on wall power you need an adapter with the following specifications:
- AC/DC adapter
- 12V, min 1A (12 watt)
- polarity: center negative
- plug: 4.75/1.7mm
warning: make sure to remove the batteries from the battery holder before connecting the dc-plug to the external ac/dc adapter. use separate battery charger to charge re-chargeable batteries.
sequencer clock outputs: please note that the modular series uses clock output levels of +10V. po sync: in order to sync with po-10/20/30 series use the dedicated po out. other signals needs to be attenuated to around 1V (max 5V).
tip! you can also use the lfo module, square out that is 5V.